Flat Roofingin San Francisco, CA
Flat roofing in San Francisco means low-slope roofs on flats, row houses, garages, additions, and small apartment buildings, where drainage, parapets, and fog decide whether a roof stays dry. Equinox Roofing Solutions replaces, repairs, and installs flat roofs in San Francisco with TPO, rubber (EPDM), PVC, and modified bitumen.
Flat Roof Replacement, Repair & Installation
- TPO, EPDM, PVC & mod bit
- Licensed C-39 & insured
- Drone-assisted inspections
- 10-year workmanship warranty
Schedule a free flat roof inspection for your San Francisco property.
Get your free estimate
Two quick steps. Free inspection, no cost and no obligation.
Request received
We'll call within one business hour to book your free roof inspection.
Quality Roofing
Backed by real testimonials
Full Roof Replacement
James Wilson
From start to finish, the team made our roof replacement easy and stress-free. The workmanship was excellent, and the finished roof looks great.
Shingle Roof
Jennifer
We're very happy with our new shingle roof. The crew was professional, efficient, and kept everything clean throughout the project.
Flat Roof
Michael R.
They quickly identified the problem with our flat roof and provided a quality solution. The entire process was smooth and professional.
Tile Roof
Robert Harrison
We had a great experience with the roofing team. They handled our tile roof project carefully and delivered excellent results.
Commercial Roofing
William Parker
They did an excellent job on our commercial roof. The crew was professional, reliable, and completed the work with minimal disruption to our business.








Flat Roof Replacement, Repair & Installation in San Francisco
Every flat roofing job in San Francisco starts with a drone-assisted inspection, a moisture check, and a written bid, so you know what is under the membrane before you commit. We replace, repair, and install flat roofs on flats, row houses, garages, additions, and small apartment buildings.
Our crew handles the permit, tear-off, deck repair, insulation, drainage, and hand-flashed details at walls, parapets, skylights, and drains. For offices, retail, and industrial buildings, we also provide commercial roofing in San Francisco, and our residential roofing services cover every type of home roof.
Flat Roofing in San Francisco: Services
San Francisco · Flat Roof Replacement & Installation
Flat Roof Replacement & Installation

As a flat roofing contractor in San Francisco, Equinox Roofing replaces and installs low-slope roofs on flats, row houses, garages, additions, and small apartment buildings with TPO, EPDM, PVC, and modified bitumen.
Flat Roof Replacement
Tear-off, deck inspection and repair, insulation, and a new membrane. Best for roofs at the end of their life or with wet insulation.
Flat Roof Installation
New membrane roofs on additions, garages, and rear extensions. Best for new construction and remodels.
TPO, EPDM & PVC Membranes
Single-ply systems with heat-welded or sealed seams. Best for most residential flat and low-slope roofs.
Modified Bitumen & Torch-Down
Multi-layer bitumen roofing. Best for roofs with foot traffic, equipment, or a roof deck.
San Francisco · Flat Roof Repair & Drainage
Flat Roof Repair & Drainage

Localized leaks on a sound roof can often be repaired. Our flat roof repair in San Francisco starts with a drone-assisted inspection and moisture check that finds where the water actually enters.
Flat Roof Repair
Leak tracing, seam and flashing repair, patching, and drain fixes. Best for active leaks and localized damage.
Insulation & Drainage
Tapered insulation, drains, and scuppers. Best for roofs with ponding water.
Inspection & Written Estimate
Drone-assisted inspection, moisture check, and measured bid. Best for comparing quotes and planning the permit.
Repair or Replace?
Widespread wet insulation, rotted decking, or repeated leaks usually point to replacement, and a moisture check settles it.
San Francisco Flat Roofing Conditions
What Makes Flat Roofing in San Francisco Different
On San Francisco flats, row houses, and garages, drainage, parapets, and fog decide whether a flat roof stays dry. Here is what to plan for before you sign a bid.
Attached Buildings & Parapets
Party walls, parapets, and tight setbacks need careful flashing, and that is where flat roofs most often leak.
Flashing DetailsDrainage
Scuppers, drains, and slope decide how fast water leaves the roof. Replacement is the time to add tapered insulation or extra drains.
Roof DrainageFog & Moisture
Constant marine moisture means a roof stays damp longer, so insulation and ventilation details matter on a replacement.
Marine ClimateSkylights, Hatches & Roof Decks
Every penetration and walking surface needs its own flashing and protection.
Roof PenetrationsTight Access
Hillside lots, no driveway, and shared walls mean hoisting and hand-carrying materials.
Project PlanningOlder Buildings
Many older flats have multiple layers or built-up roofing that must be removed and inspected before a new membrane goes on.
Existing RoofsTorch-Down & Hot Work
The permit application asks whether the roof is flat or pitched and whether you will do hot work, so torch-down roofing needs a hot-work safety plan.
Hot-Work PermitsRooftop Equipment & Foot Traffic
Mixed-use and apartment roofs with equipment and foot traffic need protection layers at walkways and equipment coordination.
Roof ProtectionLocalized leaks on a sound flat roof can often be repaired. A drone-assisted inspection and moisture check shows whether you need repair or replacement.
Schedule a Free Flat Roof InspectionHiring a Flat Roofer in San Francisco
How to Choose a Flat Roofing Contractor in San Francisco
License, Insurance & Membrane Experience
Check the C-39 roofing license at cslb.ca.gov and ask for proof of insurance. Ask to see completed flat roofs with the system you are considering.
A Clear Drainage Plan
The bid should say how water will leave the roof, not only what goes on top. Replacement is the time to add tapered insulation or extra drains where water ponds.
Permits & Hot Work
Ask who handles the permit. Torch-down also needs a hot-work plan.
Warranties & Deck Repair Pricing
Equinox provides a 10-year workmanship warranty. Ask for the manufacturer’s membrane warranty in writing, and get deck repair priced per sheet so rotted decking does not turn into a dispute. A professional roof inspection before you collect bids lets every contractor price the same scope.
TRUST
The company behind the Bay Area coverage
Established locally. Built to verify.
Flat Roof Systems & Materials
Flat Roofing in San Francisco: Systems and Materials
The right system depends on foot traffic, drainage, rooftop equipment, and your budget. We recommend a membrane only after checking your roof’s moisture, slope, and drainage.
TPO Roofing
Reflective single-ply membrane with heat-welded seams, widely used on residential flat roofs in San Francisco.
- Lifespan15–25 Years
- Key strengthHeat-Welded Seams
- Best useMost Flat Roofs
Watch for Seam quality and flashing at parapets.
Rubber Roofing (EPDM)
Durable rubber membrane with few seams on small, simple flat roofs, often a good match for a garage, an addition, or a rear flat section. It can be repaired with patches and seam tape.
- Lifespan20–30 Years
- Key strengthFew Seams
- Best useGarages & Additions
Watch for May need a white membrane or coating where cool-roof rules apply.
PVC Roofing
Single-ply membrane that resists grease, oils, and chemicals.
- Lifespan20–30 Years
- Key strengthChemical Resistance
- Best useEquipment & Vents
Watch for Higher cost than TPO.
Modified Bitumen (Torch-Down)
Multi-layer bitumen roofing that stays tough under foot traffic and equipment.
- Lifespan15–25 Years
- Key strengthFoot Traffic
- Best useRoof Decks & Equipment
Watch for Hot-work safety plan and laps.
Rubber roofing in San Francisco usually means EPDM. We confirm that your roof’s slope, drainage, and any cool-roof requirements suit the membrane before recommending it. Not sure which system fits? A moisture check shows which options are realistic.
Schedule a Free Flat Roof InspectionEquinox Roofing Latest Projects








San Francisco Flat Roofing Experts
What San Francisco Property Owners Should Know Before Flat Roofing Work
Building type, drainage, parapets, deck condition and permits all shape the right flat roof for a San Francisco property.
A drone-assisted inspection and moisture check shows what is under the membrane, so you know whether you need repair or replacement before you commit.
Schedule a Flat Roof InspectionFlat roofing in San Francisco should start with how water leaves the roof. Drains, scuppers, slope, and the flashing at parapets and shared walls decide whether a flat roof stays dry.
That is why every bid we write lists the system, insulation, tear-off, flashing details, and unit prices for deck repair. If you need flat roof repair in San Francisco, the same inspection finds where the water actually enters.
Flat Roofing in San Francisco by Building Type
Flats and Victorians with flat sections often have multiple old layers, shared walls, and skylights, so we plan a tear-off and deck inspection, wall flashing, and skylight curbs. Row houses and attached homes bring parapets, tight access, and no staging space, so they need a hoisting plan and detailed wall and parapet flashing.
Garages, additions, and rear extensions are small roofs with minimum charges and ponding, and a simple membrane such as EPDM or TPO with positive drainage usually fits best.
Small Apartment & Mixed-Use Flat Roofs
Small apartment buildings have occupied units, multiple roof sections, and drains, so we plan phased work, drain and scupper upgrades, and tenant notice.
Mixed-use buildings add rooftop equipment, foot traffic, and larger areas, which call for protection layers at walkways and equipment coordination.
We also replace and repair flat roofs on offices, retail, and industrial buildings through our commercial roofing in San Francisco service.
Flat Roofing in San Francisco Cost
Flat and low-slope membrane roofs typically run about $10–$18 per square foot installed in 2026, so a 1,000 sq ft flat roof is roughly $10,000–$18,000 before deck repairs.
Seam, patch, and drain repairs often run about $500–$2,000. Small roofs usually carry minimum charges, and access, parapets, and deck condition move the total.
Your written estimate sets the real number, with deck-repair unit prices listed up front so there are no surprises once the old roof comes off.
Flat Roof Repair vs. Replacement in San Francisco
Localized leaks on a sound roof can often be repaired with leak tracing, seam and flashing repair, patching, and drain fixes.
Widespread wet insulation, rotted decking, or repeated leaks usually point to flat roof replacement, and a moisture check settles it.
Flat Roofing in San Francisco: Permits
San Francisco requires a permit before you install, repair, or remove roofing material. The SF.gov reroofing permit page lists $514 and up for single-family homes and duplexes and $714 and up for other buildings, with additional fees depending on the project.
Only licensed C-39 contractors can apply online, and online permits are limited to work that does not require plans or replace structural parts such as decking. The application also asks whether the roof is flat or pitched and whether you will do hot work, which matters for torch-down roofing.
Fees change, so we confirm current fees with the Department of Building Inspection, pull the permit, and schedule the inspections for you.
Rubber Roofing in San Francisco (EPDM)
Rubber roofing in San Francisco usually means EPDM, a single-ply rubber membrane that works well on small, simple flat roofs with few penetrations. It is often a good match for a garage, an addition, or a rear flat section.
EPDM can be repaired with patches and seam tape. We confirm that your roof’s slope, drainage, and any cool-roof requirements suit the membrane before recommending it.
Drainage, Scuppers & Parapets Matter on Flat Roofs
Scuppers, drains, and slope decide how fast water leaves the roof. Constant marine moisture means a San Francisco roof stays damp longer, so insulation and ventilation details matter on a replacement.
Replacement is the time to add tapered insulation or extra drains where water ponds, and to flash walls, parapets, skylights, and drains by hand.
How Long Does a Flat Roof Last?
TPO and modified bitumen typically last about 15–25 years, and EPDM and PVC about 20–30 years, depending on drainage, maintenance, and exposure.
Regular inspections and clear drains help a flat roof reach the upper end of that range.
Whether you need flat roof replacement, repair, or installation, we inspect first, write a clear scope, then install.
Our San Francisco Flat Roofing Process
Flat Roofing in San Francisco: Replacement Process
Inspect, Moisture Check & Scope
We measure the roof, check drainage, and look for wet insulation or soft deck. The written bid lists the system, insulation, tear-off, flashing details, and unit prices for deck repair, and we confirm who pulls the permit and schedules inspections.
Tear-Off, Deck Repair & Drainage
Old layers come off, and the deck is inspected and repaired as needed. Insulation goes in to meet code, with tapered insulation or drains where water ponds.
Membrane, Flashing & Final Inspection
The new membrane is installed, then walls, parapets, skylights, and drains are flashed by hand. The city inspector signs off, and the crew cleans the site.
San Francisco · Flat Roofing FAQs
Flat Roofing in San Francisco FAQs
Answers to common questions about flat roof replacement, repair, systems, permits and cost in San Francisco, CA.
01 How much does flat roof replacement cost in San Francisco?
Flat and low-slope membrane roofs typically run about $10–$18 per square foot installed in 2026, so a 1,000 sq ft roof is roughly $10,000–$18,000 before deck repairs. Access, parapets, and deck condition move the total.
02 How much does flat roof repair cost in San Francisco?
Seam, patch, and drain repairs often run about $500–$2,000, and small jobs usually carry a minimum charge. An inspection finds where the water actually enters.
03 Which flat roof system is best for San Francisco homes?
TPO, EPDM, PVC, and modified bitumen all work. The right one depends on foot traffic, drainage, rooftop equipment, and budget, and a moisture check shows which options are realistic.
04 How long does a flat roof last?
TPO and modified bitumen typically last about 15–25 years, and EPDM and PVC about 20–30 years, depending on drainage, maintenance, and exposure.
05 Is rubber roofing a good choice for a flat roof in San Francisco?
Rubber roofing (EPDM) suits small, simple flat roofs such as garages and additions. Confirm the slope, drainage, and any cool-roof requirements first.
06 Do I need a permit for a flat roof in San Francisco?
Generally yes. San Francisco requires a permit before you install, repair, or remove roofing material, with limited exemptions in Building Code Section 106A.2. Torch-down work also requires you to disclose hot work on the application.
07 Can a flat roof be repaired, or does it need replacement?
Localized leaks on a sound roof can often be repaired. Widespread wet insulation, rotted decking, or repeated leaks usually point to replacement, and a moisture check settles it.
08 Do you handle flat roofs on apartment buildings in San Francisco?
Yes, for small apartment buildings and mixed-use flat roofs. Our commercial roofing team in San Francisco also handles larger office, retail, and industrial roofs.
Flat Roofing Service Areas
Flat Roofing Across San Francisco Neighborhoods
Equinox Roofing replaces, repairs, and installs flat roofs across San Francisco, from flats and row houses to garages, additions, and small apartment buildings. Every neighborhood brings its own drainage, access, and permit details, and we plan the flat roof system around them.
Chinatown
Flat roofs on dense mixed-use and apartment buildings, with rooftop equipment, foot traffic, and tenant access planned before tear-off.
Hunters Point
Flat roof replacement and repair for homes and small buildings near the bay, where wind-driven rain makes sealed seams and clear drains essential.
Lakeside
Flat roofs on garages, additions, and rear extensions in the fog belt, where insulation and ventilation details keep a damp roof from failing early.
Marina District
Membrane roofs for attached homes and small apartment buildings, with careful parapet flashing and scupper upgrades for wind-driven rain off the bay.
Mission District
Flat roofing for Victorian flats and row houses, with tear-off of old built-up layers, deck inspection, and hand-flashed shared walls and skylights.
Noe Valley
Flat sections, roof decks, and rear additions on hillside homes, with hoisting plans for tight access and protection layers where people walk.
Visitacion Valley
Flat roof repair and replacement for homes and garages, with tapered insulation or added drains where water ponds on low-slope roofs.
Other San Francisco Areas
Need flat roofing in another San Francisco neighborhood? Call our team to schedule a drone-assisted inspection, moisture check, and written estimate.
Flat roofing needs vary across San Francisco. Fog, shared walls, parapets, and tight access shape every flat roof project, so we check moisture and drainage first and match the system to your building.