Need any roofing & construction help?

Call:

How Much Do New Gutters Cost in San Francisco?

gutter system cost San Francisco

Gutter system cost in San Francisco typically runs about $1,200–$3,000 for a standard seamless aluminum replacement on a single-family home in 2026, or roughly $10–$16 per linear foot installed. New gutters cost more as the house gets taller, the roofline gets more complicated, or the fascia behind the gutters needs repair, and those conditions are common on San Francisco’s narrow, multi-story, and older buildings. This guide by Equinox Roofing breaks down new gutters cost in San Francisco by material and home size, what adds to the price, and what guard, repair, and cleaning costs.

Gutter System Cost in San Francisco by Material

Material is the biggest price driver. Aluminum dominates because it resists rust and holds paint well, while copper is a premium choice for historic and high-end homes. National pricing guides put seamless aluminum around $9–$13 per linear foot, and Bay Area labor rates and access commonly push San Francisco bids higher.

MaterialInstalled cost per linear footTypical lifespanBest for
Vinyl$4 – $810–15 yearsLowest upfront cost; less common on San Francisco homes
Aluminum, sectional$8 – $1220–30 yearsBudget replacements
Aluminum, seamless$10 – $1620–30 yearsMost San Francisco homes
Galvanized steel$10 – $1820–25 yearsHeavy rain flow
Copper$25 – $5050+ yearsHistoric and high-end homes

Seamless gutters cost more than sectional because they are formed to length on site, but they have no mid-run seams to leak, which is why they are the usual choice.

New Gutters Cost in San Francisco by Home Size

Most single-family homes need 120–180 linear feet of gutter. Row houses and narrow lots often need less because gutters may only run along the front and rear.

HomeGutter lengthEstimated cost
Row house or narrow lot, seamless aluminum80 linear ft$800 – $1,280
Typical single-family home, seamless aluminum120 linear ft$1,200 – $1,920
Larger or two-to-three-story home, seamless aluminum180 linear ft$1,800 – $2,880
Typical single-family home, copper120 linear ft$3,000 – $6,000

These totals include standard downspouts. Fascia repair, which runs about $6–$12 per linear foot nationally, and extra downspouts, about $5–$16 per linear foot, are added on top. Small jobs usually carry a minimum charge.

What Affects Gutter Installation Cost in San Francisco

FactorWhy it matters in San FranciscoEffect on cost
Stories and accessTwo- and three-story homes, narrow lots, hillsides, and no driveway mean crews use lifts or long ladders and haul debris fartherMore labor
Roofline complexityBay windows, dormers, and corners on older homes mean more cuts and mitersMore labor and material
Fascia conditionRotted fascia must be repaired before new gutters can be hungFascia repair added per linear foot
Gutter sizeHeavy winter rain and atmospheric river storms overload undersized gutters, so 6-inch gutters are a common upgradeHigher material cost
Flat roofs and scuppersMany flats and row houses drain through scuppers or internal drains, which is why flat roof leaks often start at drainage pointsCustom work rather than standard gutter runs
Downspout routingAttached buildings leave few places to route water, and longer downspout runs add costMore downspout length
Historic or landmark buildingsVisible exterior changes can be restricted, so profile and material may need to matchPossible review and custom materials

Gutter Guard Cost in San Francisco

Gutter guards typically add $5–$15 per linear foot installed, so guards on 120 feet of gutter run roughly $600–$1,800. Micro-mesh guards cost the most and keep out the finest debris, while basic screens cost less but clog more easily. Guards reduce cleaning but do not eliminate it, so ask for the brand, whether it is compatible with your gutter size, and the warranty.

Gutter Repair vs. Replacement in San Francisco

Repair is usually enough when the problem is a few leaking seams, loose hangers, or a clogged downspout on gutters that are otherwise sound. Replacement makes more sense when gutters sag or pull away from the fascia, rust through, leak at many seams, or have been patched repeatedly. A gutter that keeps overflowing despite cleaning may also be undersized or poorly pitched, which repairs will not fix.

Gutter Cleaning Cost in San Francisco

Gutter cleaning is priced mostly by home height and gutter length.

Home heightTypical cleaning cost
Single-story$100 – $180
Two-story$150 – $275
Three-story$250 – $400+

Those are national ranges, and three-story homes are common in San Francisco, so expect the upper end for tall or hard-to-reach buildings. Cleaning gutters twice a year is part of basic roof maintenance, since overflowing gutters can rot fascia and push water under the roof edge. A roof inspection is also a good time to check the gutters, fascia, and downspouts together.

Should You Replace Gutters When You Replace Your Roof?

When the roof is due for replacement, new gutters are usually cheaper to install at the same time, because the fascia and drip edge are exposed and the crew already has staging in place. Budgeting for both together is easier once you know your roof replacement cost in San Francisco, and old gutters often have to come off for tear-off anyway.

How to Get an Accurate Gutter Estimate in San Francisco

  1. Ask for measured linear feet. A written estimate should state the total length, not a rough guess.
  2. Confirm material, size, and style. The bid should say whether it is 5-inch or 6-inch, seamless or sectional, and the metal gauge.
  3. Count the downspouts. Number, size, and routing should be listed.
  4. Get fascia repair priced per linear foot. Unit pricing avoids disputes if rotted boards turn up.
  5. Ask about guards and haul-away. Confirm whether guards and old-gutter removal are included.
  6. Compare warranties. Ask about the material warranty and the installer’s workmanship warranty.

FAQs

  1. How much does a gutter system cost in San Francisco?
    A standard seamless aluminum system on a single-family home typically runs about $1,200–$3,000 in 2026. Home height, roofline complexity, and fascia condition move the total.
  2. How much do new gutters cost per linear foot in San Francisco?
    Seamless aluminum typically runs about $10–$16 per linear foot installed, sectional aluminum about $8–$12, and copper about $25–$50.
  3. Are seamless gutters worth the extra cost?
    Usually yes. Seamless gutters cost more per foot, but they have no mid-run seams to leak and typically need less maintenance than sectional gutters.
  4. How much do gutter guards cost in San Francisco?
    Gutter guards typically add about $5–$15 per linear foot installed, or roughly $600–$1,800 on 120 feet of gutter, depending on the guard type.
  5. How much does gutter cleaning cost in San Francisco?
    Cleaning typically runs about $100–$180 for a single-story home, $150–$275 for two stories, and $250–$400 or more for three stories, with the upper end common for tall or hard-to-reach buildings.
  6. Should I replace my gutters when I replace my roof?
    It is usually cheaper to do both at once, because the fascia and drip edge are exposed and staging is already in place.
  7. How long do gutters last?
    Aluminum and steel gutters typically last 20 to 30 years, vinyl 10 to 15 years, and copper 50 years or more.

Get a Free Gutter Estimate in San Francisco

Equinox Roofing is a roofing company in San Francisco with a local office, 1,000+ roofs completed, a 4.9★ rating on Google and Yelp, and a 10-year workmanship warranty. Our residential roofing services cover the roof and the drainage that protects it, and a free gutter and roof estimate gives you measured numbers and a written scope.

Free Consultation

Get a free roofing estimate from Bay Area experts. Fill out the form and we’ll contact you shortly.

Schedule your FREE

Roof Inspection/Estimate Today!

Great! We’ve received your information.